Zinc Primer Alkyd Phosphate
Zinc Primer Alkyd Phosphate
Type: one part
Shams: Depending on the order
Gloss: Matte
Chemical composition of pigment: Zinc phosphate - Titanium dioxide and pigmentation agent
Chemical composition of resin: High-resin alkyd resin based on soybean fatty acid
Specific gravity at 25 ° C: 1.4-1.5 grams per cubic centimeter
Viscosity at 25 ° C: 60 seconds with Ford Cop 6
Power coverage theory: 8-10 square meters per kilogram
Practical coverage strength: Depending on the loss factor
Recommended film thickness: 40-50 microns
Drying time: 1.5 hours at 25 ° C
Full drying time: 16 hours at 25 ° C
Full hardness: 7 days at 25 ° C
Minimum time to apply next coating: 24 hours
Usage: Brush - Rollers - Normal spray and spray without air
Conditions of application: The following level should be free of any fats and dust.
Features of this product:
1- Avoid rust
2- Flexibility, excellent adhesion and durability
3. Excellent resistance to mild (moderate to weak) corrosive environments.
Surface preparation: The iron surface should be completely clean and free from grease and salt and any other contaminants. If possible, the sa.2 standard sandwich method is recommended in Swedish standard.
Coloring Recipe:
When painting in the outlet of the compressor, make sure that the dehumidifier and the grease gun are installed.
Time to store: 12 months in dry and cool conditions, away from direct sunlight at 25 ° C
Type: one part
Shams: Depending on the order
Gloss: Matte
Chemical composition of pigment: Zinc phosphate - Titanium dioxide and pigmentation agent
Chemical composition of resin: High-resin alkyd resin based on soybean fatty acid
Specific gravity at 25 ° C: 1.4-1.5 grams per cubic centimeter
Viscosity at 25 ° C: 60 seconds with Ford Cop 6
Power coverage theory: 8-10 square meters per kilogram
Practical coverage strength: Depending on the loss factor
Recommended film thickness: 40-50 microns
Drying time: 1.5 hours at 25 ° C
Full drying time: 16 hours at 25 ° C
Full hardness: 7 days at 25 ° C
Minimum time to apply next coating: 24 hours
Usage: Brush - Rollers - Normal spray and spray without air
Conditions of application: The following level should be free of any fats and dust.
Features of this product:
1- Avoid rust
2- Flexibility, excellent adhesion and durability
3. Excellent resistance to mild (moderate to weak) corrosive environments.
Surface preparation: The iron surface should be completely clean and free from grease and salt and any other contaminants. If possible, the sa.2 standard sandwich method is recommended in Swedish standard.
Coloring Recipe:
When painting in the outlet of the compressor, make sure that the dehumidifier and the grease gun are installed.
Time to store: 12 months in dry and cool conditions, away from direct sunlight at 25 ° C