Zinc Primer Alkyd Chromate
Zinc Primer Alkyd Chromate
Type: one part
The shades: green and yellow
Gloss: Matte
Chemical composition of pigment: zinc chromate - titanium dioxide and pigmentation agent
Percentage of pigments and pigments: 50-52%
Chemical composition of the resin: long-chain alkali resin
Specific gravity at 25 ° C: 1.4 g / cubic centimeter
Viscosity at 25 ° C: 60 seconds with Ford Cop 6
Power coverage theory: 8-10 square meters per kilogram
Practical coverage strength: Depending on the loss factor
Drying time: 1.5 hours at 25 ° C
Full drying time: 16 hours at 25 ° C
Full hardness: 7 days at 25 ° C
Recommended film thickness: 40-50 microns
Conditions of application: The following level should be free of any fats, dust and other external materials.
Procedure: brush, rollers, pistol
Minimum time to apply next coating: 24 hours
Features of this product:
1- Avoid rust
2- Flexibility, excellent adhesion and durability
3. Excellent resistance to mild (moderate to weak) corrosive environments.
Surface preparation: The iron surface should be completely clean and free from grease and salt and any other contaminants. If possible, the sa.2 standard sandwich method is recommended in Swedish standard.
Coloring Recipe:
When painting in the outlet of the compressor, make sure that the dehumidifier and the grease gun are installed.
Duration and storage conditions: 12 months in a cool, dry environment away from direct sunlight
Type: one part
The shades: green and yellow
Gloss: Matte
Chemical composition of pigment: zinc chromate - titanium dioxide and pigmentation agent
Percentage of pigments and pigments: 50-52%
Chemical composition of the resin: long-chain alkali resin
Specific gravity at 25 ° C: 1.4 g / cubic centimeter
Viscosity at 25 ° C: 60 seconds with Ford Cop 6
Power coverage theory: 8-10 square meters per kilogram
Practical coverage strength: Depending on the loss factor
Drying time: 1.5 hours at 25 ° C
Full drying time: 16 hours at 25 ° C
Full hardness: 7 days at 25 ° C
Recommended film thickness: 40-50 microns
Conditions of application: The following level should be free of any fats, dust and other external materials.
Procedure: brush, rollers, pistol
Minimum time to apply next coating: 24 hours
Features of this product:
1- Avoid rust
2- Flexibility, excellent adhesion and durability
3. Excellent resistance to mild (moderate to weak) corrosive environments.
Surface preparation: The iron surface should be completely clean and free from grease and salt and any other contaminants. If possible, the sa.2 standard sandwich method is recommended in Swedish standard.
Coloring Recipe:
When painting in the outlet of the compressor, make sure that the dehumidifier and the grease gun are installed.
Duration and storage conditions: 12 months in a cool, dry environment away from direct sunlight