Epoxy coltan Paint
Epoxy coltan Paint
Type: two-part
Sham: black
Chemical Properties of Pigments and Resins: Eutrophication with Coltara (coal tar) with a minimum moisture content of 5%
Hardener: Amino or amide or polyaminoamide
Percent solid content at 105 ° C: not less than 80%.
Specific gravity at 25 ° C: 1.2-1.4 g / cubic centimeter
Mixing viscosity at 25 ° C: 70-80 seconds with Ford Cap 4
Drying time: 4-6 hours at 25 ° C
Full hardness time: 7 days at 25 ° C
Minimum dry film thickness: 100-120 microns
Average color yield: 4-5 square meters per kilogram
Minimum and maximum execution time of the next layer: at least 8 hours and maximum 24 hours (if needed)
Application method: brush, spray with air and without air
Mixing ratio of two components: = 50/10 hardener / paint
Storage conditions: 12 months at 20-25 ° C
Maximum life of mixed materials: 24 hours at low concentration
Surface surface to be applied: 1. Primer wash 2. Sand blasting sa2.1 / 2 (directly on metal)
Result of this color:
Vessel Spray Test (ASTM B-117): 400 hours
In front of the humidity cavity test (ASTMD-2247): 400 hours
Basic Features:
1 - Excellent anti-corrosion properties
2. Excellent resistance to moisture and water and crude oil
3 - High adhesion to concrete and metal
Notes: When applying this color, it is necessary to use anti-chemical gloves and glasses and hats and masks and avoid contact with this color, especially the hardener with the skin.
Type: two-part
Sham: black
Chemical Properties of Pigments and Resins: Eutrophication with Coltara (coal tar) with a minimum moisture content of 5%
Hardener: Amino or amide or polyaminoamide
Percent solid content at 105 ° C: not less than 80%.
Specific gravity at 25 ° C: 1.2-1.4 g / cubic centimeter
Mixing viscosity at 25 ° C: 70-80 seconds with Ford Cap 4
Drying time: 4-6 hours at 25 ° C
Full hardness time: 7 days at 25 ° C
Minimum dry film thickness: 100-120 microns
Average color yield: 4-5 square meters per kilogram
Minimum and maximum execution time of the next layer: at least 8 hours and maximum 24 hours (if needed)
Application method: brush, spray with air and without air
Mixing ratio of two components: = 50/10 hardener / paint
Storage conditions: 12 months at 20-25 ° C
Maximum life of mixed materials: 24 hours at low concentration
Surface surface to be applied: 1. Primer wash 2. Sand blasting sa2.1 / 2 (directly on metal)
Result of this color:
Vessel Spray Test (ASTM B-117): 400 hours
In front of the humidity cavity test (ASTMD-2247): 400 hours
Basic Features:
1 - Excellent anti-corrosion properties
2. Excellent resistance to moisture and water and crude oil
3 - High adhesion to concrete and metal
Notes: When applying this color, it is necessary to use anti-chemical gloves and glasses and hats and masks and avoid contact with this color, especially the hardener with the skin.